AD-55 and AD-155 13.8V 27.6V Switching Power Supply with UPS function Charger

Model		AD-55A		AD-55B
Output	Output Channel	Ch1	Ch2	Ch1	Ch2
	DC voltage	13.8V	13.4V	27.6V	26.5V
	Rated current	3.5A	0.23A	1.8A	0.16A
	Current range	0~4A	------	0~2A	------
	Rated power	51.38W		53.92W
	Ripple&noise	100mVp-p	------	100mVp-p	------
	Voltage adj.range	Ch1:12~14.5V		Ch1:24~29V
	Voltage tolerance	±1.0%	------	±1.0％	------
	Line regulation	±0.5%	------	±0.5％	------
	Load regulation	±0.5%	------	±0.5％	------
	Set up,rise time	800ms,50ms/230VAC    1600ms,50ms/115VAC(full load)
	Hold up time（Typ.)	80ms/230VAC   16ms/115VAC(full load)
Input	Voltage range	88~264VAC or  124~370VDC
	Frequency	47 ~ 63Hz
	Efficiency	71%		74%
	AC current	1.6A/115V   1.0A/230V
	Inrush current	Cold start: 20A/115V    40A/230V
	Leakage current	<1mA/240VAC
Protection	Overload	Rated output power 105%~150%
		Protection type:AC Charging Mode:hiccup mode,auto-recovery after fault condition is removed            UPS Mode:Protected by internal fuse
	Over voltage	Ch1:15.87~18.63V		Ch1:31.74~37.26V
		Protection type:Hiccup mode,recovers automatically after fault condition is removed
	Battery low	9.5~11V		20~22V
Environment	Working temperature	-10℃～+60℃(Refer to "Derating Curve")
	Working humidity	20-90%RH non-condensing
	Storage temp,humidity	-20~+85℃，20%-90%RH
	Temp.coefficient	±0.03%℃(0-50℃)
	Vibration	10 ~ 500Hz, 2G 10min./1cycle,60min. each along X, Y, Z axes
Safety & EMC	Safety standards	Compliance to:CE and GB4943.1 EN 60950.1 safety standards
	Withstand voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC  O/P-PG:0.5KVAC
	Isolation resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC emission	EN61000-3-2:2014/EN61000-3-3:2013
	EMC immunity	EN 55032:2015/EN55035:2017/60950-1
Others	MTBF	≥304.3K hrs MIL-HDBK-217F(25℃)
	Size	L159*W97*H38mm
	Packing	0.5KG
Note	1. All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature. 2. Ripple&noise are measured at 20MHz of bandwidth by using a 12 "twisted pair -wire terminated with a 0.1uf and 47uf parallel capacitors. 3. Tolerance:includes set up tolerance,line regulation and load regulation. 4. Derating output is required under low input voltage. Please refer to the derating curve for details. 5. The power supply should be considered as a part of the components in the system. All EMC tests will test the test samples on a metal iron plate with a thickness of 1mm, a length of 360mm * width of 360mm.

Model		AD-155A		AD-155B		AD-155C
Output	Output Channel	Ch1	Ch2	Ch1	Ch2	Ch1	Ch2
	DC voltage	13.8V	13.3V	27.6V	27.1V	54V	53.5V
	Rated current	10.5A	0.5A	5A	0.5A	2.7A	0.2A
	Current range	0~11.5A	0~0.55A	0~5.5A	0~0.5A	0~2.7A	0~0.5A
	Rated power	151.W		151.W		156.5W
	Ripple&noise	150mVp-p	------	150mVp-p	------	150mVp-p	------
	Voltage adj.range	Ch1:12~14.5V		Ch1:24~29V		Ch1:48~58V
	Voltage tolerance	±2.0%	------	±1.0％	------	±1.0％	------
	Line regulation	±0.5%	------	±0.5％	------	±0.5％	------
	Load regulation	±0.5%	------	±0.5％	------	±0.5％	------
	Set up,rise time	1000ms,90ms/230VAC   2000ms,90ms/115VAC(full load)
	Hold up time（Typ.)	24ms/230VAC   20ms/115VAC(full load)
Input	Voltage range	88~264VAC or  124~370VDC
	Frequency	47 ~ 63Hz
	Efficiency	80%		84%		84%
	AC current	2.5A/115V   1.5A/230V
	Inrush current	Cold start: 23A/115V    45A/230V
	Leakage current	<1mA/240VAC
Protection	Overload	Ch1:Rated output power 105%~150%  Ch2:0.51~0.9A
		Protection type:AC Charging Mode:hiccup mode,auto-recovery after fault condition is removed            UPS Mode:Protected by internal fuse
	Over voltage	Ch1:15.87~18.63V		Ch1:31.74~37.26V		Ch1:62.1~72.9V
		Protection type:Shut down the O/P voltage,re-power on to recover
	Battery low	10V±0.8V		19V±1V		39V±2V
Environment	Working temperature	-10℃～+60℃(Refer to "Derating Curve")
	Working humidity	20-90%RH non-condensing
	Storage temp,humidity	-20~+85℃，20%-90%RH
	Temp.coefficient	±0.03%℃(0-50℃)
	Vibration	10 ~ 500Hz, 2G 10min./1cycle,60min. each along X, Y, Z axes
Safety & EMC	Safety standards	Compliance to:CE and GB4943.1 EN 60950.1 safety standards
	Withstand voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC  O/P-PG:0.5KVAC
	Isolation resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC emission	EN61000-3-2:2014/EN61000-3-3:2013
	EMC immunity	EN 55032:2015/EN55035:2017/60950-1
Others	MTBF	＞183.3K hrs MIL-HDBK-217F(25℃)
	Size	L199*W110*H50mm
	Packing	0.7KG
Note	1. All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature. 2. Ripple&noise are measured at 20MHz of bandwidth by using a 12 "twisted pair -wire terminated with a 0.1uf and 47uf parallel capacitors. 3. Tolerance:includes set up tolerance,line regulation and load regulation. 4. Derating output is required under low input voltage. Please refer to the derating curve for details. 5. The power supply should be considered as a part of the components in the system. All EMC tests will test the test samples on a metal iron plate with a thickness of 1mm, a length of 360mm * width of 360mm.

{"json":"[{\"photoId\":\"462102684\",\"photoType\":\"pdf\",\"photoSize\":\"484\",\"name\":\"AD-55.pdf\",\"fileId\":\"21139994\",\"encodeFileId\":\"rZUfWVqYJzeO\",\"photoUrlNormal\":\"//rjrorwxhikmrlm5p-static.micyjz.com/static/assets/widget/images/downloadNew/pdf.svg\"},{\"photoId\":\"462102704\",\"photoType\":\"pdf\",\"photoSize\":\"536\",\"name\":\"AD-155.pdf\",\"fileId\":\"21140004\",\"encodeFileId\":\"RFUKrgqZApfE\",\"photoUrlNormal\":\"//jlrorwxhikmrlm5p-static.micyjz.com/static/assets/widget/images/downloadNew/pdf.svg\"}]","type":"1"}